If the power supply is plugged into a working outlet and the lift continues to beep call for service as soon as possible. If the lift doesn’t stop beeping check the power supply.
#REPLACING BLU R1 HD BATTERY CODE#
The A1 code is telling you the lift is not charging. The batteries will need to be replaced and the lift charging circuit should be checked.Ĭ6- The batteries are fully charged, C6 Code is displayed for the 130 models and is a normal operating code.Ĭ7- T700 Models Power supply charger voltage too LOW.Ĭ8- Power supply charger voltage too HIGH.Ĭ9- Battery fault charger is connected but not charging.Ī1- Stair lift is beeping, the lift is not parked on a charging station. This is a battery fault problem and requires a service call. The lift can flash C1 then C4 and back to C1 while in battery charge mode.Ĭ5- The charger is connected but not charging. It’s normal for the C1 AND C4 codes to alternate while charging. All Acorn lifts run off the batteries, the household power is supplied to charge these batteries. Here are the most common codes for the Acorn 120 and 130 stair lifts.Ĭ1- This code is normal, it’s to let you know the batteries are charging.Ĭ4- The internal lift batteries are fully charged. It is important to note the codes flash in a sequence of a letter then a number. If your lift stops working the codes on your lift can tell you what the problem is. Stair lifts have many features to keep you safe and operational at the same time. Acorn stair lift codes models 120/130 Explanation of the codes, what they are telling you and what to do.
0 kommentar(er)
